Trending News
Subscribe to blazing fast internet today! Call 844-760-4221
Stone-coated metal roofing shingles are a type of composite material that uses pre-made steel sheets. How do you choose what's right for you?

What are stone coated metal roofing shingles?

Stone-coated metal roofing shingles are a type of composite material that uses pre-made steel sheets as the base materials and top them with an exterior layer of asphalt, concrete, clay, or pigmented bitumen. The finished product protects from heat radiation and impact from hail stones while shielding against ultraviolet rays. Stone-coated metal roofing offers up to twice the performance of traditional stone tile roofs in some climates.

Steps when Installing Stone-Coated Steel Roofing

Tools

Professional roofers recommend using specialized cutters and a panel bender to cut and form the panels. You can also use hand seamers, aviator snips, and impact drivers. When it comes to battens, you can use the standard screwdriver, string line, caulking gun, nail gun, tape measure, hammer, or saw.

Walking on the roof

You should place your feet on the areas the panels are supported by the battens (the front lip of your panels). Notably, you should not walk near the side laps of the panel. Apart from that, you should follow the guidelines provided by the manufacturer.

Fastener

If installing the stone-coated panels in batten, you should use fasteners installed on the panel nose. Such location serves to protect the fastener from elements associated with heavy rainfall. Most importantly, the fasteners should exceed or meet standard corrosion resistance measured by your area’s building codes.

One of the first steps when Installing Stone-Coated Steel Roofing is determining the number of squares or sheets required for each slope of your roof based on the pitch and square area needed. You’ll determine this using a calculator that assumes all sheets are laid out horizontally. Then, you’ll list the correct number of squares to order and any accessories needed for the job. You should know that it’s always wiser to order more sheets than you think you need, just in case.

The next step is to choose a shingle or planter box, which will be installed first before laying down the roofing sheets. The best time to install them would be after the roof has been applied, as it can complicate things when trying to work on them simultaneously. To install the planter box, you’ll need to dig around an inch down each side of the one you’re installing and then install a 1/2″ piece of metal. After that, your planter box should be inserted into the hole and pounded into place. Next, you’ll have to attach the metal surface, giving your stone-coated steel roof added strength and durability. You should use mortar or any other form of adhesive that works for your area in question. After that is complete, you must smooth out any wrinkles with a spatula or hammer.

Benefits of installing stone-coated metal roofing shingles

Easy to install

Stone-coated metal roofing shingles do not require the adhesion of a special polymer to adhere the roofing to the roof surface. They are also versatile, allowing you to install them easily on virtually any property. That makes them great options for those with little experience installing roofs but who have plenty of time on their hands and don’t mind doing a few simple hacks to get things done in less than an hour. Also, metal, unlike asphalt, is not easily damaged by weather. You don’t need a professional to drive over to your property or home to install stone-coated metal roofing shingles. You can do it yourself! If you have simple tools in your garage, you can start working on installing your roof and save lots of money. The only demerit is that it takes a considerable amount of time to get used to installing stone-coated metal roofing shingles, but once you do, you’ll be able to create roofs that look as good as any other professionals.

Durability

Due to the stone coating, it will require less maintenance and repairs. For instance, with the Technonicol stone-coated metal shingles here, you’ll enjoy improved durability compared to other roofing shingles. The durability provided by this type of shingle increases as time goes on because these materials can last up to 70 years without needing to be replaced. Additionally, these roofing materials provide a long service life, with the average lifespan of a stone-coated metal roof over 25 years. That means you relax knowing that your roof will last several years and be ready to last even longer with proper use.

Flexibility

If you’re interested in enjoying a sloped roof on your home, these shingles might be the answer. The stone-coated metal roofing shingles offer exceptional flexibility when installed as a sloped material due to their ability to curve rather than break like other materials. This flexibility makes these materials an excellent choice for curved or sloped roofs since they can curve around corners without breaking or cracking. Also, the flexibility provided by these coating materials allows them to retain their natural appearance over time with minimal cracking or chipping.

Energy Efficiency

Metal roofs are lighter and more energy efficient than standard asphalt shingles. That means your cooling and heating bills will be less than if you were to install asphalt shingles. Stone-coated metal roofing shingles also have a solar reflective quality, so they will help keep your home warmer during the winter while also preventing heat loss in the summer. Further, these shingles offer a Class A fire rating and are made from 100% recycled materials. Such a case explains why many homeowners choose to install these stones because of their excellent cooling abilities; this is especially important for those who live in areas that receive heavy snowfall each year or have temperatures that rise to five digits during the summer.

Water Resistant

Another benefit of installing stone-coated metal roofing shingles on your property is the water-resistant nature of the stone coating. The synthetic surface that adorns the stone-coated metal roofing shingle resists most forms of wear and tear over time because the material doesn’t absorb water like other types of roofs. That makes these shingles an excellent choice for areas such as your rooftop, where the roofing materials are exposed to heavy rainfall and moisture, while other types of shingles would quickly become damaged and worn down over time.

Eco-friendly

Most metal roofing materials like asphalt put a great deal of stress on the environment, releasing harmful gasses into the atmosphere. Stone-coated metal roofing shingles, on the other hand, don’t have any harmful gasses to release, nor do they have any moving parts. They are also 100% recyclable, and you can get back some of your money if you sell your home since many homeowners install these stones to sell their homes for a higher price because of their aesthetics.

If you want a new roof to install on your home or business, the stone-coated metal roofing shingles might be just what you need. With these roofing shingles, you’ll enjoy numerous benefits, such as improved energy efficiency and durability. So, when looking for a new type of roof, please give these high-quality materials a chance.

Share via:
Sponsored Post
No Comments

Leave a Comment